Duotight Push-In Fitting - 9.5 mm (3/8 in.) Ball Valve

This Duotigh valve is perfect when you need a shutoff inline. It is used primarily for the gas side and with  6.3 ID X 9.5mm OD hose. It is normally used for the gas side, but can also be used for liquid in applications were less restriction is...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Plug

This Duotight Push In Fitting allows you to plug an unused port on a 9.5mm duotight fitting. It is also easy to unplug the port when you need to use it again. Can be used for both Gas and liquid applications Temp rated to 212 and pressure rated to...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Tee

This Duotight Tee is for 6.3 ID X 9.5mm OD hose. It is normally used for the gas side, but can also be used for liquid in applications were less restriction is wanted CMBecker Flow Control faucets and Inline Flow Control) Duotight...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Elbow

This Duotight elbow is for 6.3 ID X 9.5mm OD hose. It is normally used for the gas side, but can also be used for liquid in applications were less restriction is wanted CMBecker Flow Control faucets and Inline Flow Control) Duotight fittings...

Duotight Push-In Fitting - 8mm (5/16 in.) x 8mm (5/16 in.) Male Elbow

The Duotight elbow has a female 8mm fitting on one side and a male on the other. This fitting is designed for 8mm tubing like the 4mm x8mm EVABarrier OD Tubing. We also carry a version of this fitting for 6.3 ID X 9.5mm OD...

Duotight Push-In Fitting - 8 mm (5/16 in.) Ball Valve

This Duotigh valve is perfect when you need a shutoff inline. It is used primarily for the liquid side and with 4mm x8mm EVABarrier hose.   Duotight fittings feature a dual oring design that give  you a better, more reliable...

Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread

This Duotight fitting is just what you need to connect to a standard beer shank or beer coupler. This will allow you to connect with EVABarrier 8mm beer hose.  Keep the following in mind when using Duotight fittings: You need to cut your hose...

Digital Mini Pressure Gauge (0-90 psi) - 8 mm Duotight Compatible

This digital gauge works great with Duotight fittings. It is designed to slip into any 8mm duotight fitting. This means it can be used directly with a disconnect attached to a duotight MFL fitting, inline using a Duotight Tee in conjunction with a...

BlowTie Diaphragm Spunding Valve

This Blow Tie Spunding Valve is great for pressure fermenting. This is the base unit, but you can add a disconnect on one side, a Tee in the middle with a gauge on the top and this spunding valve at the end (see forth photo). You can also use other...

Duotight Push-In Fitting - 8 mm (5/16 in.) Tee

This Duotight Tee is 8mm and designed to be used with EVABarrier 9.5mm hose. It is most often used for gas, but can also be used with flow control faucets that need less restriction like the CMBecker Faucets or CMBecker Inline Flow Control. Keep...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. Flare

This 9.5mm x 1/4" flared Duotight fitting is perfect for connecting to a 1/4" flared CMBecker disconnects and other 1/4 flared fittings, including gas regulators. The 9.5mm fitting is typically used for 6.3 ID X 9.5mm OD hose...

Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. Flare

This 8mm x 1/4" flared Duotight fitting is perfect for connecting to a 1/4" flared CMBecker disconnects and regulators. They have a female flair that will fit other male MFL flair fittings as well. This fitting is designed for 8mm tubing like...