Product Description
This Dual Body Regulator is perfect for those who want to keep different pressure on different beer styles. It is also used for those who wish to have beer and soda off the same CO2 tank. You can serve multiple kegs with this system by adding an air distributor to one or both outlets.
Taprite Regulators are a commercial grade beer regulator that is used by professional installers in bars and restaurants all over the world. They are also available for your home brew draft beer system, so you can experience the same quality and reliability as the professionals. This is the most consistent, reliable regulators in on the market today.
- Includes Kegconnection's DOUBLE LENGTH WARRENTY (Click HERE to view) for Home Users!
- Assembled and tested in the USA!
- Built in accordance with UL Standard 252 and the requirements of MIL-STD-105E
- Built in O-ring Seal to CO2 cylinder, don't have to keep up with fiber washer!
- Stays on pressure even as your CO2 cylinder goes down in volume.
- Available in many configurations to fit your needs, including primary and secondary models.
- Rebuild kits are available so you can keep this regulator in service indefinitely.
- 10 Micron Filter built in to keep contaminants out of regulator
-
Comes with 1/4" MFL ends on check valves. Pick 5/16" or 1/4" barbed swivel nuts depending on the size of the hose you will be using.
- This regulator is part of Taprites premium 740 series, not the economy series that you will find on some sites. This is a commercial grade regulator!
WARNING: This product can expose you to Lead, which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Product Videos
Custom Field
Product Reviews
8 Reviews Hide Reviews Show Reviews
-
Great Value for the Price!
I've been using this regulator purchased right here at Keg Connection, for a few years now. It's been working flawlessly everyday since I built my Keezer. Easy to adjust and fine tune, no tools needed to adjust the pressure, and the gauges are top notch. I just bought another one for my brother-in-law today for his birthday. Great Product!
-
It does what it's supposed to do!
MFL Barbs came assembled with no leaks. Regulator works as intended. Both sides have a wide range of sensitivity for precise PSI. Great for closed transfers. Order was fast an accurate!
-
Wow, what a difference!
I bought an el cheapo and used it for a few years. I wish I’d have simply bought this one in the beginning. I got tired of the inaccurate and rough adjustment. What a big difference.
-
Works great
Replaced my single regulator with this a week ago. Works well. It's great to be able to carbonate one keg & drink from a second.
-
Great product, no issues
This product installed on my gas tank easily and quickly. Adjusting pressures was a snap, literally. Pull the dial, spin in your pressure, snap it back into locked mode. Not too heavy for a 5lb tank, no tipping issues. No leaks, works great. On another note, I had questions about what i received in my order. They were answered immediately and i received a bunch of parts from the manufacturer in a few days. bonus!
-
Excellent Regulator
Finally got around to start kegging this month. Regulator is rock solid. Performs beautifully. Highly recommend spending the few extra $$ for one of the best.
-
solid regulator
This is my first regulator and from first appearances, the quality is high. The weight of the product leads me to believe this is a solidly built item. I haven't had a chance to use it yet but it is going into my first kegerator. So far, the unit seems to be in great working order. I can't wait to use it.
-
good, but possibly shipped poorly (not Keg Connection's fault)
The product shipped quickly, and arrived in a small, sturdy box inside of a much larger box (needed for other items in my order). The inner box containing the regulator did not appear to be damaged, but the larger, outer box definitely showed signs of a rough transit. When I removed the regulator, one of the needles was dislodged and laying loose in its enclosure. I unscrewed the cover and placed it back on the pin and it seemed to be OK, but the readings were not increasing as I would expect on both dials as I continued to dial up the pressure. A little playing with it revealed that the cardboard behind the needles that provides the gauge markings was bent forward, preventing the needles from rotating properly. I forced it down a little on both dials and everything now seems to be working correctly.
