Shanks

90 Degree Tailpiece 1/4" SS - Fits 3/16" or 1/4" Hose

90 DEGREE TAILPIECE 1/4"

Shanks - Choose Your Size

Choose the right size you need to get the job done! We offer Chrome Plated Brass or Stainless Steel Shanks come assembled. High Quality Chromed Brass or 304 grade Stainless Steel Please note that we do not always have 8", 10' and 12' Shanks in...

Tower Shank

This Shank assembly is for replacing shanks on beer towers, or adding an additional shank to a beer tower. It has all the components to attach to a beer tower. Barbed end will fit 1/4 or 3/16 beer line. We recommend using 3/16" beer line for proper...

Shank, Beer Line Connection Kit

This kit will allow for 3/16 beer line installation on a standard Shank, kit includes: Tailpiece, Washer, Shank Nut and Stainless Worm clamp. We also offer this kit with an upgrade to a stainless steel tailpiece. This would normally be used with a...

4 1/8" Stainless Steel Self Closing Shank (Makes most standard shanks self closing)

4 1/8" SS Shank, Self Closing. This will allow you to convert most beer faucets into self closing. We also have these listed under faucets with a stainless steel standard faucet, a standard chrome faucet or a CMB V3S Faucet. You can use this with your...

Shank Parts List

Type a description for this product here... WARNING: This product can expose you to lead, which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more information go to: www.P65Warnings.ca.gov.

Hole Saw 15/16 for Installing Beer Shanks

This 15/16 hole saw is the perfect tool to drill out holes for beer shanks.  This gives a air tight fit than a 1" hole saw, but still allows shank to slide in freely.    Need to install beer shanks in a fridge?  Click here to view...

CMBecker Flow Control Shank, 5" SS

CMBecker Flow Control Shank, 5" stainless steel. This shank is used with all CMBecker flow control faucets.

CMB Flow Control Faucet Shank, 8"

This is a complete 8" CMB stainless steel shank for CMB flow control faucets. It includes all shank parts, but no fittings on the back or faucet

Hex Nut, Beer

This nut is used for attaching tailpieces to beer shanks and/or couplers (taps) WARNING: This product can expose you to lead, which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more information go...

Winged Nut, Beer

This nut is used for attaching tailpieces to beer shanks and/or couplers (taps). Winged for easy screwing and unscrewing.     WARNING: This product can expose you to lead, which is known to the state of California to cause cancer, birth...

Tailpiece, 3/16" - Fits 3/16" or 1/4" Hose

This tailpiece is commonly used to attach either 3/16" or 1/4" hose to a shank or coupler (Tap) WARNING: This product can expose you to lead, which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more...