Parts

3' High Pressure Hose Assembly with CGA580 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,

3' High Pressure Hose Assembly with CGA580 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,  One side connects directly to the tank, the other side has female FFL to connect to male 1/4' MFL.

3' High Pressure Hose Assembly with CGA580 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Left Hand Threaded Regulators,

3' High Pressure Hose Assembly with CGA580 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Left Hand Threaded Regulators,  One side connects directly to the tank, the other side has female FFL to connect to male 1/4' MFL.

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Left Hand Threaded Regulators,

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/2" FFL with 1/4" MPT, Set up for LEFT Hand Threaded Regulators   One side connects directly to the tank, the other side has female MFL to connect to male 1/4' MFL.

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/2" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/2" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,   One side connects directly to the tank, the other side has female MFL to connect to male 1/4' MFL.

Replacement Taprite Bonnet Assembly

With this Taprite regulator bonnet assembly you can replace your worn down or broken bonnets & knobs on Taprite Series 740hp and Taprite Series 5700hp primary regulators. This bonnet assembly is made from polycarbonate. Including the housing and...

Flat Seal for Taprite CO2 Regulator Tank Fitting

Over time, Taprite CO2 regulator fittings can become worn at the seals. This flat seal will fit your Taprite regulator and will fix your pesky leak on your system. Simply use a 5/32” Allen wrench to remove the brass plug at the end of the...

A Taprite Regulator repair rebuild kit

This is a Taprite Rebuild kit for 740 series regulator.  It includes the diaphragm, cartridge and thrust washer.  This kit fits both old and new 740 regulators with metal or plastic bonnets.  In the past Taprite made a kit for old bodies...

Regulator Washer

Regulator washer (NYLON) for use between CO2 cylinder and regulator. These are used on all of our in house (Chudnow) regulators and on TOF Regulators, however, you do not need to (want to) use this washer on a Taprite regulator because they have a built...

CO2 CGA 320 Nut, Nipple and Washer

These parts are for connecting a beer or soda regulator to a CO2 Cylinder.  The nut in this section is for CGA320 valve, which is the standard valve for CO2 cylinders in the USA and many other countries.  The nipple comes with Teflon tape...

Taprite CGA320 Nipple with built in CO2 Cylinder Washer, Left Hand Thread

This nipple fits on Taprite and other left hand thread nipples. This is a Taprite brand, direct replacement and includes a new tank seal. You can also purchase a new nut, Click Here for a direct link. This is made of brass and the thread is left hand...

1/4x1/4 Nipple, 2 1/2" Long

This 2 1/2" nipple is 1/4" X 1/4" NPT right hand thread (National Pipe Thread) and is used for connecting regulator bodies together. These nipples are thick, with wrench flats for easy installation and durability.  We use them for secondary Taprite,...

Nipple Left hand thread X Left hand threads, Hex 1 7/8" Long

Hex Nipple 2" long, Left hand threads on both sides. Used to join Taprite Regulator Bodies together. WARNING: This product can expose you to lead,  which is known to the state of California to cause cancer, birth defects and other...