Duotight Push-In Fitting - 8 mm (5/16 in.) Elbow

$2.49

(1 review) Write a Review

This Duotight elbow is for 4mm ID X 8mm OD EVABarrier hose/tubing. This size is normally used for liquid, but is used for gas on Duotight inline regulators and some other Duotight products.

Duotight fittings feature a dual oring design that give you a better, more reliable seal.

Keep the following in mind when using Duotight fittings:

You need to cut your hose straight (not at an angle) and firmly push the hose into the fitting until it locks in place.
If you need to remove the hose, but pull back on the collet.
Can be used with liquid or gas. Made from acetal plastic and the orings are made from EPDM, which is chemical resistant.
Do not use with chlorinated cleaning solutions including bleach. This will degrade the plastic.
No clamps are used. The hose is clamped internally by the collet and orings.
Temperature rated to boiling (212) and pressure rated to 150PSI.

Write a Review

Write a Review