Product Description
CMBecker Add a Body
This add a body will work with either primary or secondary CMBecker regulators and other right hand thread regulators on the market.
For primary regulator: Remove your high pressure gauge and screw the nipple into the space that the high pressure gauge occupied and then put the gauge on the other empty hole on the opposite side of the add a body. Make sure you use Teflon tape and/or pipe sealer and test when done with soapy water.
For secondary regulator: Remove plug from your existing regulator on the left high pressure port. Then screw in this body. Then put the port in the hole on the opposite side. Make sure you use Teflon tape and/or pipe sealer and test when done with soapy water.
Need help? Call us at 325-356-5204