Product Description
Brew Clean
This is an excellent cleaner for stainless Cornelius/Firestone style kegs, beer lines and other stainless, glass or plastic or rubber homebrew equipment.
For homebrew kegs use at least two table spoons (more if kegs are stained) and fill kegs with hot water, depress dip tube poppets and allow tubes to fill with solution. Soak lid in solution with pressure relief valve open. Water should be 100 to 160 degrees. Let sit for at least one hour (overnight soak for heavy stains) and then rinse and sanitize. You can re-use solution to wash additional equipment or kegs.
For other homebrew equipment use one tablespoons per gallon, more if items are heavily soiled or stained. Use hot tap water between 100 and 160 degrees. Let pieces sit for at least an hour for maximum cleaning valve.
For beer lines use 1 tablespoon per quart. Run half of solution through beer lines into bucket. Dis-assemble faucets and place them in solution in bucket. Let everything soak for about an hour. Then reassemble faucets and re-attach to system. Run remaining solution through lines followed by clean water.
Other benefits:
* Specifically designed for cleaning homebrew kegs and Brewing equipment
* Non-corrosive, will not cause rust on kegs or other homebrew equipment, formula
actually helps protect metal from corrosion.
* Wetting agent helps remove beerstone and other soils.
* Powerful detergent cuts down on need for scrubbing.
* Will not leave a film on kegs, lids or other brewing equipment like some cleaners
* Non-hazardous Replaces Caustic Soda Cleaners, Safe to handle.
* Cleaner is supercharged with active oxygen
Product Videos
Custom Field
Product Reviews
14 Reviews Hide Reviews Show Reviews
-
Maintenance
Must have for monthly maintenance!
-
Cleaner
Good stuff.
-
BREW CLEAN | EQUIPMENT CLEANSER SOLUTION
This is a great cleaner! I ordered 4 pounds and it came in 1 pound packaging which is great. I use it for stainless as well as beer lines.
-
BREW CLEAN | EQUIPMENT CLEANSER SOLUTION
I thought I would try this cleaner simply based on what Todd said about his father's participation as a chemical engineer. I will use it this weekend and if it works as it's supposed to, I will by more.
-
Kegerator Line Cleaner
Simple to order and received package promptly. I'm pretty new to the kegerator scene, but this product does the job and I needed more.
-
Good for soaking parts
I use this for soaking my couplers and faucets and it works well, I prefer BLC and ALC for beer line cleaning but I'm sure this would work fine. Good multipurpose cleaner and will continue to keep on hand. As others have mentioned, it does need to be packaged better as I too had some leak out in shipping..
-
Brew Clean
Been using this since day one. Have found no reason to use anything else. Watch my mentor scrub away and decided to try this when I started on my own. Much less effort, excellent results, and easy to use. My equipment is 70 qt extreme cooler (mash tun) and two 15gal kegs with 2 pumps and plate chiller. Add the fermenters, kegs, and hoses and the clean up time shoots down another day. Anything to reduce the amount of scrubing & brushing is welcome! Works for me!
-
Brew Clean
Product works well. Shipping was quick but packaging was not good. Four bags were loose in box and one had opened spilling powder.
-
Good but not great
Having gone through 8# of a 50# bucket, I feel ready to give some pros and cons. Pros Cost: A bucket of this is $120 shipped. That's drastically cheaper than PBW. No film: Doesn't leave a film when left a long time like PBW. I have left for items for several days and it rinsed right off. Cons While this works extremely well, PBW just slightly out preforms it. I normally use this for all light too mid cleaning applications, but PBW on hard intense cleaning. Overall a great product that I use quite often. I also have extremely hard water.
