Air Distributor Parts

1/4"MFL X 1/4" Left Hand MPT

1/4 Left Hand Thread NPT x 1/4 MFL (Flared) Nipple This nipple is for connecting a left hand thread primary regulator to an MFL connection. These are sometimes used when attaching to a high pressure hose or when you want to convert a primary into a...

Brass Barbed Nipples

Brass Barbed Nipples Choose between 3 different brass barbed nipples for both inlet and outlet use on draft beer equipment. We have 1/4", 5/16" and 3/8" barbs available The other side of these barbs is 1/4" MPT (Male Pipe Thread) which is used on...

1/4" MFL Nipple x 1/4" MPT

Our 1/4" MFL Nipple x 1/4 MPT adapter has a 1/4" MFL (right-hand male flare thread) to 1/4" MPT (right-hand male pipe thread) which enables you to attach a 1/4" swivel nut or or 1/4" FFL (female flare thread). This can work as in input on a...

Plug, 1/4" MPT (Male Pipe Thread)

This 1/4" MPT (Male Pipe Thread) plug is great to use on any brass or aluminum port to seal air flow.  We use the on our regulators and air distributors.  When using with aluminum we find you sometimes need Teflon tape and  a pipe thread...

Blank WYE

Blank WYE with 1/4" NPT Male Inlet with two Female 1/4" NPT outlets.  This can be used for CO2 distribution on a regulator.  We add Teflon tape to the threads so you can get a good seal when installing. Important information regarding Prop. 65...

Nipple 1/4" MPT X 1/4 MPT

This nipple is 1/4" MPT X 17" MPT (Male Pipe Thread).  This is often used to attach two air manifolds together or for other applications where you need to join two Female 1/4 FPT parts together.  It is one inch long.   Important...

1/4" MPT X 1/4" MPT Coupler

This brass coupler is 1/4" Female Pipe Thread (FPT) x 1/4" FPT  They can be used to put together any 1/4" Male Pipe Thread (MPT) fitting of brass, plastic or Stainless Steel.     Important information regarding Prop. 65 for California...