Accessories

3' High Pressure Hose Assembly with CGA580 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,

3' High Pressure Hose Assembly with CGA580 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,  One side connects directly to the tank, the other side has female FFL to connect to male 1/4' MFL.

3' High Pressure Hose Assembly with CGA580 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Left Hand Threaded Regulators,

3' High Pressure Hose Assembly with CGA580 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Left Hand Threaded Regulators,  One side connects directly to the tank, the other side has female FFL to connect to male 1/4' MFL.

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Left Hand Threaded Regulators,

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/2" FFL with 1/4" MPT, Set up for LEFT Hand Threaded Regulators   One side connects directly to the tank, the other side has female MFL to connect to male 1/4' MFL.

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/2" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/2" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,   One side connects directly to the tank, the other side has female MFL to connect to male 1/4' MFL.

5/16" Gas Line Assembly

This gas line assembly gives you everything you need to add a line to an air manifold or a beer regulator.  CMBecker Disconnect in either Ball Lock or Pin Lock. These are made in Germany and assembled in the USA! The best disconnect on the...

CMB CO2 and Nitrogen Wrench, Made in Germany - Plastic

 This CO2 and Nitrogen wrench is the very well made and is affordable enough that you can leave it on the regulator and never have to hunt for a wrench to remove and replace your CO2 and Nitrogen cylinder again. Made in Germany of a very high...

CO2 and Nitrogen Wrench - Steel

This CO2 regulator Wrench is used to attach your regulator to your CO2 and Nitrogen tank. It is designed to stay on the tank/regulator after attaching (it comes off the nut and hangs on the nipple) so you don't misplace it. This wrench fits both...

CO2 and Nitrogen Wrench - Metal

This CO2 regulator Wrench is used to attach your regulator to your CO2 and Nitrogen tank. It is designed to stay on the tank/regulator after attaching (it comes off the nut and hangs on the nipple) so you don't misplace it. This wrench fits both...

High Pressure Hose, Left Hand Thread

For use to connect any secondary or primary regulator to the CO2 cylinder LEFT HAND THREAD   For any questions please email help@kegconnection.com or call 325-356-5204! Sleeve protected ends, Rated to 2750 PSI Nipple for CGA320 Valve with...

Regulator Guage Boot Small

Use these boots on your brand new Taprite regulator. This fits one gauge per boot so you will need to order two for a two gauge regulator (or more for multiple gauge regulators. These really helps protect your regulator, but not as well as the cage...

Regulator Guage Boot

These are regulator gauge boot(s)for a Taprite regulator. You will need to order two for a two gauge regulator (or more for multiple gauge regulators. These really help protect your regulator, but not as well as the cage. People with 3 or more gauges...

Regulator Guage Cage

This regulator guage cage is heavy guage metal with a black powder coat finish and comes with a bolt to attach it to your Taprite regulator. This will only fit a taprite regulator. Provides extremely good protection for the...