9.5mm Fittings

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 9.5 mm (3/8 in.) Male Elbow

This Duotight fitting features a 9.5mm male fitting on one end and a female fitting on the other end. The female end can be used with EVABarrier 9.5mm hose and the male end can plug directly into Duotight fittings. Duotight fittings feature a dual oring...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP Ball Valve

This Duotight fitting attaches to 9.5mm hose on one side and has 1/2" threaded BSP thread on the other side. NOTE....this is 1/4" BSP thread, not 1/2" NPT! Duotight fittings feature a dual oring design that give  you a better, more reliable seal...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Joiner

This Duotight fitting is for joining two pieces 9.5mm of EVABarrier hose together.  Duotight fittings feature a dual oring design that give  you a better, more reliable seal. Keep the following in mind when using Duotight...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Check Valve

This Duotight is great when you need an inline check valve. It is in 9.5mm which is the most common size used for gas with Duotight fittings and EVABarrier 6.3mmx9.5mm hose. Why do you need an inline check valve? This only allows gas to flow only one way...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Ball Valve

This Duotigh valve is perfect when you need a shutoff inline. It is used primarily for the gas side and with  6.3 ID X 9.5mm OD hose. It is normally used for the gas side, but can also be used for liquid in applications were less restriction is...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Plug

This Duotight Push In Fitting allows you to plug an unused port on a 9.5mm duotight fitting. It is also easy to unplug the port when you need to use it again. Can be used for both Gas and liquid applications Temp rated to 212 and pressure rated to...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Tee

This Duotight Tee is for 6.3 ID X 9.5mm OD hose. It is normally used for the gas side, but can also be used for liquid in applications were less restriction is wanted CMBecker Flow Control faucets and Inline Flow Control) Duotight...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. Flare

This 9.5mm x 1/4" flared Duotight fitting is perfect for connecting to a 1/4" flared CMBecker disconnects and other 1/4 flared fittings, including gas regulators. The 9.5mm fitting is typically used for 6.3 ID X 9.5mm OD hose...