Product Description
Our four faucet shank kit allows you to convert a Keezer, refrigerator or even walk in cooler into a beer dispense system. We use quality components including American made, NSF approved beer lines, your choice between a commercial grade German Made / Assembled in the USA premium CMBecker International regulator or a Taprite regulator, and other quality components. We also allow you to change the length of your stainless steel or chrome plated beer shanks and choose between a wide selection of faucets including the premium German made CMB V3S forward seal faucet with creamer for a perfect pour! Add a 15/16 hole saw for drilling the perfect hole in wood or metal for a beer shank.
WARNING: This product can expose you to lead, which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Product Videos
Custom Field
Product Reviews
43 Reviews Hide Reviews Show Reviews
-
Perfect for noobies
This kit was perfect! My first experience with home brew setup was made much easier by using this. Having everything tested and pre-assembled is well worth it!
-
Dont waste time looking for all the parts. This set is complete and ready to roll.
Most parts come pre-assembled, just go on and install them. No need to look for anything extra. I'm glad I found it.
-
Save time and frustration and order the entire kit here
Could have save a few $'s (less than $25) trying to buy all the parts from multiple vendors, etc., but the great thing about this kit is all hoses were already connected, everything was included, no trips to home depot for missing parts, etc. Took about an hour to drill the three holes in the fridge door and hook everything up. Would certainly buy again. The only error was on my side as I should have ordered a drip tray.
-
READY TO SERVE
I set apart a better portion of my day to piece everything together. To my surprise when I opened the box to inventory it all IT WAS FULLY ASSEMBLED!!!! SAY WHAT!????? Yes, fully assembled and ready to go! Had everything mounted and set up in minutes!!!! Classy!!! Keg Connection is legit!!! A nice little touch was to deliver the kegs charged with just enough air/gas to know they are holding a seal!! classy!
-
Great One-Stop Shop Kit!
The only things that I can complain about are my own fault. I didn't need a regulator but I did need an air dispenser. I clicked on the wrong thing when ordering and didn't get the air dispenser. Be sure to carefully read the small print in the dropdown windows! I also decide to go the least expensive route and I got the standard faucets. I can already tell that I should have gone ahead with higher quality products. The standard will be fine, they are more than adequate, but I know that it's not going to be long before I invest in better. As others have mentioned, everything comes pre-assembled and ready to go. Other than installing the shanks into the keezer and then adding the faucets, there is nothing to do but hook up the kegs.
-
Great products even better customer service!
The 4 faucet fridge kit with 4 corny ball lock kegs is fantastic. Comes completely assembled and all you need to do is drill the holes. Also had a little mix up with the line length that was taken care of in literally 2 days. Fantastic experience overall and can't wait to get more stuff from them!
-
Very Impressed
I had read a few reviews mentioning that the kit comes assembled but I was blown away when mine arrived. Literally the only thing left for me to do was attach my CO2 tank and install the tap shanks in my keezer collar. All of the lines are fully assembled and ready to hook up to a keg. If you order this, make sure you have a batch of beer ready to keg because you’re not going to want to wait to get pouring.
-
Incredible product, just as incredible customer service
I honestly could not have gotten a better deal or been happier with what I bought. The kit was shipped promptly, everything was already assembled for me/clamped together/pressure tested. It was all packed nicely into a large box, which, while said box did show a bit of wear/beating, everything inside was nice and snug+safe. Even if I had have sourced every part individually from separate sites, there's no way I could have gotten it all at as low of a cost as I did here. Kegs were in great condition (a few dents, but that's what you get when they're refurbished), cleaned, and pressurized. They even gave me a set of new O-rings for each keg! Not only that, but Zack is the MAN when it comes to customer service and answering questions promptly. I must have bugged him 4-5 separate times before hitting the "place order" button, and he answered right away each time, usually within an hour or two. For anyone thinking of building their own keezer/kegerator, don't hesitate to get everything here. You won't be disappointed.
-
6 stars
Absolutely amazing product for the money, best price I could find anywhere. Also it's very helpful that it comes pre-assembled.
